Civil Engineering Lagoon for Pond

Welcome to our factory specializing in Civil Engineering Lagoon for Pond construction. We offer high-quality products for enhancing water and landscape projects.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
0.2-3.0mm
Model No.
Gh-2s
Width
1-8m/ as Your Request
Length
50-100m/ as Your Request
MOQ
5000 M2
Standard
ASTM Gri-GM13
Sample
Freely
Hscode
3920109090
Transport Package
Nonwoven
Specification
110-1000g, 0.2-3.0mm
Trademark
DAJIN
Origin
Shandong, China
HS Code
3920209090
Production Capacity
1000000sqm/Month

Product Description

ASTM GRI-GM 13 1.5MM HDPE geomembrane landfill pond liner

Manufacturing Technique 
Civil Engineering Lagoon for Pond
Civil Engineering Lagoon for Pond


HDPE Geomembrane liner is made from polyethylene polymer materials by the film-blowing process.it is most widely
used for solid waste containment (such as landfill liners), mining and water containment applications.
Item
Product Name: HDPE Geomembrane
Thickness: 0.2mm-3.0mm(Main:0.5mm, 0.75mm,1.0mm,1.5mm,2.0mm)
Length : 50m/roll,100m/roll,150m/roll or follow your request 
width: 1m-8m or follow customers' demand, Main width is 4m,5m,5.8m,6.0m
Surface Both side smooth/both side textured
one side textured one side smooth, or as your request
Color: White,Black,Green,Blue,mainly black
Material: HDPE,LDPE,LLDPE, ( 100% Virgin)
Certification: ISO9001:2008,
Standard:  ASTM GRI-GM13

Product Description 
Geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical
engineering related material so as to control fluid (or gas) migration in a human-made project, structure,
or system. Geomembranes are made from relatively thin continuous polymeric sheets, but they can also
be made from the impregnation of geotextiles with asphalt, elastomer or polymer sprays, or as multilayered
bitumen geocomposites. Continuous polymer sheet geomembranes are, by far, the most common.
Civil Engineering Lagoon for Pond

Main Features:  
1.Waterproof and impermeable
2.UV resistance
3.High tearing resistance 
4. Puncture-resisting
5.Nontoxic,non-tasteness. Long life:over 100 years underground without sunlight. 

Civil Engineering Lagoon for Pond
Civil Engineering Lagoon for Pond


Packaging & Shipping  
The geomembrane roll are in the hand sewing woven bag packing, safe and scratch-proof. The bag color can be
customized, with your own logo.

Civil Engineering Lagoon for Pond


A pplication  
Various waterproof and anti-seepage projects such as landfills, solid waste treatment stations, tailings storage yards
,sewage ponds, petrochemicals, construction, water conservancy, mining, landscape gardens, subway tunnels,
aquaculture, livestock biogas digesters, etc.

Civil Engineering Lagoon for Pond

Civil Engineering Lagoon for Pond

Environmental protection projects:Landfill,sewage treatment plants,power plant regulating pools,industrial and hospital solid wastes,etc.
Mining:heap leaching platforms, conduit and retention channels and wells for liquid solutions, , final disposal reservoirs.



Index
S/N
 
Item Index
Thickness mm 0.75 1.00 1.25 1.50 2.00 2.50 3.00
1 Density
g/cm3
≥0.940
2 Tensile yield strength (vertical and horizontal)
N/mm
≥11 ≥15 ≥18 ≥22 ≥29 ≥37 ≥44
 
3 Tensile breaking strength (vertical and horizontal)
N/mm
≥20 ≥27 ≥33 ≥40 ≥53 ≥67 ≥80
4 Elongation (vertical and horizontal)
%
- - - ≥12
5 Elongation at break (vertical and horizontal)
%
≥700
6 Tearing load at right angle (vertical and horizontal) N ≥93 ≥125 ≥160 ≥190 ≥250 ≥315 ≥375
7 Anti-puncture strength
N
≥240 ≥320 ≥400 ≥480 ≥540 ≥800 ≥960
8 ' Tensile load stress cracking (tensile method of dead load of the cut)
h
_ ≥300
9 Carbon black content
%
2.0~3.0
10 Carbon black dispersion The number of Level 3 among 10 data is not more than one; Level 4 and Level 5 are not allowed.
  Oxidation induction time (OIT)
min
Oxidation induction time under normal pressure ≥100
11* Oxidation induction time under disjoining pressure ≥400
12 85°C thermal aging (retention rate of OIT under normal pressure after 90d) % ≥55
13a Ultraviolet resistance (retention rate of OIT after 1600h ultraviolet irradiation)
%
≥50
 Note: Technical performance index of thickness specification not listed in the table shall be implemented according to interpolation method.
For two indexes of Item 11 and Item 13, select one from retention rate of OIT under normal pressure and retention rate of OIT under high pressure and carry out the test.

C ompany introduction  
Shandong Dajin Geosynthetics Co.,LTD is a comprehensive geosynthetic service provider as well as solution provider
integrating Engineering design, manufacturing, installation, guarantee in Seepage control industry.
The products provided by Dajin include geotextile, geomembrane, composite geomembrane warp-knitted geogrid, glass
fiber geogrid, plastic geogrid, steel-plastic geogrid, mining geogrid,  high-strength mining polyester fiber mesh,geocell and
other geosynthetics.Our goal is to become a world-class company dedicated to providing our customers with comprehensive,
reliable and high-quality services and solutions. Meeting the needs of people to increase their quality of life, promoting the
smart use of the planet's resources.
Civil Engineering Lagoon for Pond


D esign
The Dajin engineering team can provide solid advice on all types of Seepage control insustry, as well as their
correct design for projects, including construction details and advice on the general configuration of the project.

Civil Engineering Lagoon for Pond


Documentation
Each roll of Dajin geomembrane has its own identification number. The identification number is traceable in line
with the quality control plan.  Dajin can add the necessary documentation or modify the packing for countries
and territorieswith special product certification requirements.
Civil Engineering Lagoon for Pond


Civil Engineering Lagoon for Pond



FAQ
Q: Are you trading company or manufacturer ?
We are factory.
Q:Is the quality of your products stable?
The company has a complete QC system, and each batch of products will be sampled and the samples will be kept for 5 years.
Q:Can you do OEM?
Yes, of course. We can produce the products as your request.
Q: Do you provide samples ? is it free ?
Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to quantity.       
Q: What is your terms of payment ?
Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance,balance before shipment.
If you have another question, please feel free to contact us at any time.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours